Installation Guide

Troubleshooting

Reset the device

Cannot connect to your Wi-Fi network.

Make sure you entered the correct Wi-Fi password during the

Wi-Fi setup. Check whether there are any Internet connection

problems. If the Wi-Fi signal is too weak, reset your Wi-Fi

router and try again.

Reset once (off and on 3 times) to reach Easy Mode, which

is the primary way the app will try to connect. (When in Easy

Mode, you’ll see the bulb flashing quickly, 2x per second)

Reset again (off and on 3 times) to reach AP, which is the

Backup Mode to help connect. (When in AP Mode, you’ll see

the bulb blinking slowly, every 3 seconds)

System Requirements

Mobile device running iOS® 9 or higher or Android™ 5.0 or

higher

Existing Wi-Fi Network

Existing light socket (E26 base)

Technical Specifications

E26 base

120 V, 60 Hz

Wi-Fi: IEEE 802.11n, 2.4GHz

(not compatible with 5GHz Wi-Fi networks)

Name and Control Each Device by Voice

VOICE

CONTROL

GUIDE

Thank you for purchasing your GEENI smart home

product. Make sure your devices are already set up

using the Geeni app, then follow these steps.

Contents

Google Assistant

Amazon Alexa

Voice Control Guide