Operating Guide

32
1 Montage et câblage
SURVOL DE LA FIXATION
Boîte de jonction
(non incluse)
Plaque de
montage
Vis de
fixation
Écrous à câble
Vis de la plaque de montage
AVERTISSEMENT : Risque d’électrocution
• Connexion d’alimentation de 100~240 V CA. Vérifier que la tension
d’alimentation est correcte.
• Débrancher l’alimentation avant de mettre l’appareil en marche. Utilisez
le disjoncteur de votre maison pour couper le courant. Cela vous protège,
vous et votre caméra.
• Fixation au sol appropriée
• Respectez toujours les normes du code lors de l’installation des
connexions câblées.
• Consulter un électricien si nécessaire.
MISE EN GARDE : Risque d’incendie, ne pas installer à proximité de
surfaces combustibles.
21
Indicator Light: By default, the camera lights up to show it’s on. Switch
“Indicator Light” off to hide the light.
Flip: If you mount your camera upside down, toggling the “Flip” function
will rotate the image so that it’s right side up.
Time Watermark: Turn the time watermark on to always see a time
stamp of when video is taking place.
Motion Detection: When turned on, you’ll receive notifications to your
phone whenever the camera senses motion. Press to turn Motion
Detection off, schedule motion alerts and/or control floodlight duration.
Night Vision: The camera is set to automatically activate night vision in
the dark. Toggle here to manually turn night vision on or off.
SD Card Settings:
SD Card options includes erasing your microSD Card.
IR Night Vision
Schedule
Floodlight
Auto
Motion
GNC-CW016_Manual_122719_REV.indd Spread 23 of 28 - Pages(32, 21)GNC-CW016_Manual_122719_REV.indd Spread 23 of 28 - Pages(32, 21) 12/27/19 2:31 PM12/27/19 2:31 PM