User Manual

32
Plug In
STEP 2
01.
In the Geeni app, on
the top corner of the
Devices screen, click
Choose “Wi-Fi Camera”.
02.
Make sure the light on
the camera is blinking
red, indicating the
device is ready to
connect, then press
Next Step.
STEP 3
Add device:
Easy Mode
Add device:
QR Code Mode
04.
The Geeni app will
attempt to connect.
This may take a few
moments. When the
blinking light turns solid
blue, connection was
successful!
NOTE: Geeni can’t connect to
5GHz networks.
*If the connection fails, try to
connect using QR Mode.
03.
Enter your Wi-Fi
network and password.
01.
Be sure to reset camera
by pressing the reset
button for 3-4 seconds.
02.
In the Geeni app, on the
top corner of the Devices
screen, click
Choose “Wi-Fi Camera”
Choose “QR Code” in the
top corner.
03.
Click Next and enter your
Wi-Fi details.
Connect (Easy & QR Mode)Plug In
*Optional:
Insert
Micro SD
card as
shown
Easy Mounting
Plug camera into
power source using the
included USB cable.
The indicator will
remain solid red when
starting up, but will
begin to blink red when
connected. If it does
not blink, please reset.
*see reset instructions
on p. 4
QR Code