S TA RT G U I D E SM A RT WI-FI C A M ERA
Thank you for purchasing your GEENI smart home product. Get started using your new devices by downloading Geeni, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi, and control multiple devices from the touch of your fingertips.
FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Download & Register STEP 1 START GUIDE Download the Geeni App from App Store or Google Play. What’s in the Box Smart Wi-Fi Camera Power Adapter USB Cable Mounting Kit (Screws + Wall Anchors + Mounting Plate) User Manual Register an account on your Geeni App. 01. Enter your mobile phone number or email address Reset Pin Get Ready iOS 9 Know your Wi-Fi network and password Android 5.0 Make sure your mobile device is running iOS® 9 or higher or Android™ 5.0 or higher 03. Log in to the App. 2.
Plug In Mounting STEP 2 STEP 4 Plug In Mount The Camera: Plug camera into power source using 01. Use the included 2 screws and 2 wall anchors to mount the camera. the included USB cable. The indicator will remain solid blue when starting up, but will begin to blink blue when it is ready to be connected. If it does not blink, please reset. *see reset instructions on p. 4 02. Rotate the base of the camera on to the mounting plate.
Add Device Connect (Easy & QR Mode) STEP 5 STEP 6 How do I reset my device? and what does the blinking light mean? Tilt up either manually or through the app to access the reset hole in the front of the camera next to the microSD slot. Take the reset pin and push it in. Wait for the indicator light to start blinking to confirm that the camera has been reset. Add device: Easy Mode Reset Pin RESET MICRO SD 01. In the Geeni app, on the top corner of the Devices screen, click Choose “Wi-Fi Camera”. 02.
Connect (QR Mode) Main Screen Main Screen Add device: QR Code Mode 01. Be sure to reset camera by pressing the reset button for 3-4 seconds. 02. In the Geeni app, on the top corner of the Devices screen, click Choose “Wi-Fi Camera” Choose “QR Code” in the top corner. 03. Click Next and enter your Wi-Fi details. 04. Scan the QR code with the camera. When you hear the camera beep, select ‘I heard the beep’ and it will add your camera. 05.
Main Screen MAIN SCREEN Record: Press here to start video recording. Press again to stop the recording. Note: the video files are saved to your phone’s memory. Please use your photo/video viewer on your phone to watch the videos. Screenshot: Press here to take a screenshot. Note: the photos are saved to your phone’s memory. Please use your photo viewer on your phone to see the pictures. Playback: View recorded motion alert videos here.
Settings Indicator Light: Two-way Audio Mode : By default, the camera lights up to show it’s on. Switch “Indicator Light” off to hide the light. In this mode, there is full two-way simultaneous communication. While the Press & Hold to speak button is pressed, you will be able to hear audio from the camera’s microphone while you are speaking. This may cause an echo. Flip Video: IIf you mount your camera upside down, toggling the “Flip” function will rotate the image so that it’s right side up.
Questions. Troubleshooting. Notices Frequently Asked Questions Can I share with family and friends? Yes! You can share access to all Geeni devices— cameras, plugs, bulbs, doorbells, etc.— with family & friends. In the Geeni app, press the “Profile” button and click on “Device Sharing” to give or revoke sharing permissions. In order to share, the other user should have already downloaded the Geeni app and registered an account.
To control your GEENI smart home products, just say “OK Google,“ or VOICE CONTROL GUIDE “Hey Google,“ and ask. Make sure your devices are already set up using the Geeni app. Things you can say*: Thank you for purchasing your GEENI smart home “Hey Google, show me the Living Room Camera.“ “Hey Google, what’s on Kid’s Room Camera?“ product. Make sure your devices are already set up using the Geeni app, then follow these steps. Your video device is able to stream video to these leading smart assistants.
Google Assistant 03 To control your GEENI smart home products, just ask Alexa. Choose “Geeni“ from the list of Home Control partners. Make sure your devices are already set up using the Geeni app. Things you can say*: “Alexa, show Living Room Camera.“ “Alexa, show me the kids room Camera.“ 04 Authorize your account with Google Assistant using the username and password from your Geeni app. Stream to: Amazon Echo Show, Amazon Fire TV, and any Alexaenabled TV or screen.
Amazon Alexa 03 Authorize your account with Smart Home Skills using the username and password from your Geeni app. 04 Choose “Discover Devices.“ After a few seconds your GEENI devices will be displayed under Smart Home in the Alexa app. You can rename your devices in the Geeni app, and Alexa will refer to them by the same name.
Can’t connect? Need help? WE CAN HELP DO NOT RETURN THIS PRODUCT TO THE STORE s u p p o r t . myg e e n i . c o m ( 8 8 8 ) 2 3 2 - 3 1 4 3 To l l - f r e e or tap ‘support‘ for help in the Geeni app.
