S TA RT G U I D E SMART WI-FI LED STRIP
Thank you for purchasing your GEENI smart home product. Get started using your new devices by downloading Geeni, one convenient app that manages everything Can’t connect? Need help? straight from your phone or tablet. Easily connect to your home Wi-Fi, and control multiple devices from the touch of your fingertips. WE CAN HELP DO NOT RETURN THIS PRODUCT TO THE STORE s u p p o r t . myg e e n i . c o m ( 8 8 8 ) 2 3 2 - 3 1 4 3 To l l - f r e e or tap ‘support‘ for help in the Geeni app.
Contents Start Guide Download & Register 01 Prepare 02 Connect (Easy Mode) 03 Connect (AP Mode) 04 Questions, Troubleshooting, Notices 06 Voice Control Guide 16 Google Assistant 08 Amazon Alexa 10 Cortana 12
FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Microsoft Cortana 03 Important Information: Before installing or replacing a bulb, read and follow all precautions, including Choose “Geeni“ from the list of Connected Home partners. the following:CAUTION: RISK OF ELECTRIC SHOCK OR BURNS - USE IN A DRY LOCATION ONLY. The weather resistant IP44 rating only protects the LED strip from splashes in any direction. DO NOT IMMERSE IN WATER. WARNING: The LED strip must be unplugged when making any modifications to the device.
To control your GEENI smart START GUIDE bulbs, plugs or surge protectors, just say “Hey Cortana,“ and ask. Make sure your devices are already set up using the Geeni app. Things you can say*: What’s in the Box Smart Wi-Fi LED Strip “Hey Cortana, turn on the bedroom light.” “Hey Cortana, turn off fan.” “Hey Cortana, set the bedroom light to 100%.” “Hey Cortana, turn off the coffee machine.” “Hey Cortana, set the living room to 50%.” “Hey Cortana, dim porch light.
Amazon Alexa 03 Authorize your account with Smart Home Skills using the username and password from your Geeni app. Download & Register STEP 1 Download the Geeni App from App Store or Google Play. 04 Choose “Discover Devices.“ After a few seconds your GEENI devices will be displayed under Smart Home in the Alexa app. You can rename your devices in the Geeni app, and Alexa will refer to them by the same name.
Prepare STEP 2 To control your GEENI smart bulbs, plugs or surge protectors, Plug In just ask Alexa. Make sure your devices are already Reset Button set up using the Geeni app. Press: Turn On/Off Press & Hold: Reset Things you can say*: Power Adapter “Alexa, discover my devices.“ “Alexa, turn on the bedroom light.“ “Alexa, set the bedroom light to orange.“ “Alexa, turn off the coffee machine.“ “Alexa, set the living room to 50%.“ “Alexa, dim porch light.
Google Assistant Prepare + C G R B + C G R B + C G R B Choose “Geeni“ from the list of Home Control partners. + C G R B 03 04 Located the closest cut mark to your desired length. Each strip has cut markings located every 10cm. Take a sharp pair of scissors or blade, and cut along the cut mark. Authorize your account with Google Assistant using the username and password from your Geeni app.
Connect (Easy Mode) To control your GEENI smart STEP 3 works with Hey Google Add device: Easy Mode bulbs, plugs or surge protectors, just say “OK Google,“ or “Hey Google,“ and ask. Make sure your devices are already set up using 01. In the Geeni app, on the top corner of the Devices screen, click Choose “Smart Lighting”. 02. Make sure the indicator light is flashing quickly, indicating it’s ready to connect. If not, hold the reset button until it’s flashing. Press “Next the Geeni app.
Connect (AP Mode) Add device: Backup AP Mode VOICE CONTROL GUIDE flashing slowly 01. Make sure the device is in AP Mode, blinking slowly *see reset instructions on p. 5 02. In the Geeni app, on the top corner of the Devices screen, click Choose “Smart Lighting” Choose “AP Mode” in the top corner. Thank you for purchasing your GEENI smart home product. Make sure your devices are already set up using the Geeni app, then follow these steps. 03. Click Next and enter your Wi-Fi details. 04.
Questions. Troubleshooting. Notices Frequently Asked Questions Can I share with family and friends? Yes, you can share your bulbs with family and friends who will have access to control your bulbs, plugs, cameras, and other Geeni devices. In the Geeni app, press the Profile button and click on the “Device Sharing” button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Geeni app and registered a new account.
