SMART WI-FI PLUG START GUIDE
Thank you for purchasing your MERKURY smart home product. Get started using your new devices by downloading Geeni, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips.
What’s in the Box SMART WI-FI PLUG START GUIDE VOICE CONTROL GUIDE • Smart Wi-Fi Outdoor Plug • User Manual • Voice Control Guide Get Ready • Know your Wi-Fi network and password • Make sure your mobile device is running iOS® 8 or higher or Android™ 4.1× or higher • Make sure you’re connecting to a 2.
1 2 Download the Geeni app from App Store or Google Play.
2 Register an account on your Geeni app. STEP 1. Enter your mobile phone number or email address. STEP 2. Enter the verification code and create a password.
2 Register an account on your Geeni app. STEP 3. Login to the App.
3 Plug In STEP 1. Plug the Geeni device into the wall. Make sure the indicator light on the device is flashing rapidly blue, indicating the device is ready to connect. Solid: Connected Blinking fast: Easy Mode Blinking slow: AP Mode How do I reset the device and what does the blinking light mean? On: Switch On Off: Switch Off Reset the plug by pressing and holding the button for 3 seconds until the indicator light is flashing rapidly.
4 Add device. Method 1: Easy Mode STEP 2. In the Geeni app, on the top corner of the Devices screen, click (+). Choose “Smart Power“. 6 STEP 3. Make sure the indicator light on the device is flashing rapidly blue, indicating the device is ready to connect using Easy Mode. If not, press and hold the Button for 3 seconds until the indicator light is flashing rapidly, then press “Next Step”.
STEP 4. Enter your Wi-Fi network and password. STEP 5. The Geeni app will try to connect your device. *If the connection fails, try to connect using AP Mode.
5 Add device. Method 2: Backup AP Mode STEP 1. Make sure the device is in AP Mode, blinking slowly (see reset instructions on p. 5) STEP 2. In the Geeni app, on the top corner of the Devices screen, click (+). Choose “Smart Power“. Choose “AP Mode” in the top corner. 8 STEP 3. Click Next and enter your Wi-Fi details.
STEP 4. Follow the instructions to choose the device from your Wi-Fi list. STEP 5. The device will connect.
Frequently Asked Questions 1. Can I share with family and friends? Yes, you can share your plugs with family and friends who will have access to control your bulbs, plugs, cameras, and other Geeni devices. In the Geeni app, press the Profile button and click on the “Device Sharing” button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Geeni app and registered a new account. 2.
5. The device appears offline or unreachable, what should I do? Make sure your Wi-Fi router is online and in range. Make sure you have the latest Geeni functionality by clicking “Check for firmware update” in your device settings. 6. What’s the Wireless Range? The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data. 7.
Troubleshooting Cannot connect to your Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again. Reset the device To Reset plugs, press and hold the power button for 3 seconds.
FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Can’t connect? Need help? DO NOT RETURN THIS PRODUCT TO THE STORE Geeni support: support@mygeeni.com or tap ‘Support’ for help in the Geeni app.
