SMART WI-FI DIMMER LIGHT SWITCH START GUIDE
Thank you for purchasing your Geeni smart home product. Ready to get started? Download the Geeni app to manage your TAP (and all other Geeni devices) straight from your phone or tablet. Easily connect to your home Wi-Fi and control multiple devices with the touch of your fingertips. WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Please follow all safety instructions on page five before installing, servicing, or removing your TAP.
1 Download the Geeni app 2 Register a Geeni account STEP 1 Enter your mobile phone number or email address. 2 STEP 2 Enter the verification code and create a password.
2 Register a Geeni account, cont. 3 Install STEP 1 Shut off power at the circuit breaker for the switch that you are replacing. More than one disconnection may be required to turn off power. Use a noncontact voltage tester to ensure that power is off. OFF STEP 2 Make sure the existing switch box has a neutral wire*. Remove old switch by disconnecting all wires. *Neutral wire is typically white. ON STEP 3 Log into the app. Disconnect all wires.
3 Install, cont. STEP 3 Connect TAP’s neutral wire (white) to your home’s neutral wire. Connect TAP’s load wire (brown, labeled as “SW” on the back of the switch), to your home’s load wire first. Then connect the live wire (black, labeled as “Live” on the back of the switch), to your home’s live wire . Be mindful not to reverse the live and load wires. Connecting TAP’s ground wire (green) to your home’s ground wire is optional. 3 Install, cont. STEP 4 Use screws to secure TAP into your wall.
4 4 Reset and restart QUICK TIP: On the TAP Faceplate, the Reset button as the Power Reset button and the Restart button is also known as the Wi-Fi Reset button. Power Reset Press to reset the circuit if the TAP switch isn't working. Reset Restart Wi-Fi Reset Press and hold to put it in Wi-Fi pairing mode. Reset 8 Restart See next page for Wi-Fi Reset instructions. Reset and restart, cont.
5 Connect: Easy Mode STEP 1 Open the Geeni app. In the top corner of the Devices screen, click (+). Choose “Smart Power“. STEP 2 Make sure TAP’s light is rapidly flashing blue. If not, reset to reach Easy Mode to connect (Page 9). Press “Next Step” in the app. 10 STEP 3 Enter your Wi-Fi network and password. STEP 4 The Geeni app will connect to TAP. NOTE: Geeni can’t connect to 5GHz networks. *If the connection fails, try to connect using AP Mode.
6 Connect: AP Mode STEP 1 Make sure TAP’s light is slowly flashing blue. If not, reset to reach AP mode (page 9). STEP 2 Open the Geeni app. In the top corner of the Devices screen, click (+). STEP 3 Press “Next” and enter your Wi-Fi details. STEP 4 Follow the instructions to choose the device from your Wi-Fi list. STEP 5 The Geeni app will connect to TAP. Choose “Smart Power“. Choose “AP Mode” in the top corner. 12 NOTE: Geeni can’t connect to 5GHz networks.
Frequently Asked Questions 1. Can I share with family and friends? Yes, you can share access to TAP and any other Geeni device. In the Geeni app, press the “Profile” button and click on “Device Sharing” to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Geeni app and registered an account. 2. Can I group multiple Geeni devices together? Yes, you can group multiple same-type devices by room, location, or however else you want.
Troubleshooting FCC Notice: Reset the device Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Can’t connect to Wi-Fi? Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems.
Can’t connect? Need help? DO NOT RETURN THIS PRODUCT TO THE STORE Geeni support: support@mygeeni.