SMART WI-FI OUTLET START GUIDE
Thank you for purchasing your Geeni smart home product. Ready to get started? Download the Geeni app to manage your CURRENT (and all other Geeni devices) straight from your phone or tablet. Easily connect to your home Wi-Fi and control multiple devices with the touch of your fingertips. What’s in the Box A CAUTION: • Use only copper wire • Do not operate with the faceplate removed • This product should only be installed by a qualified electrician and in compliance with local and national electrical codes.
1 Download the Geeni app 2 Register a Geeni account STEP 1 Enter your mobile phone number or email address. 2 STEP 2 Enter the verification code and create a password.
2 Register a Geeni account, cont. 3 Install STEP 1 Shut off power at the circuit breaker for the outlet that you are replacing. More than one disconnection may be required to turn off power. Use a noncontact voltage tester to ensure that power is off. OFF STEP 2 Remove old outlet by disconnecting all wires. ON STEP 3 Log into the app. Disconnect all wires.
3 3 Install (cont’d) STEP 4 STEP 3 A Connect CURRENT’s neutral wire (white) to your home’s neutral wire. Connect CURRENT’s line (Black), Neutral (White), and Ground (Green) wires as shown . Install (cont’d) Use the two A screws to secure the CURRENT to the junction box.
3 Install (cont’d) 4 Reset and restart (cont’d) STEP 4 B Use the two B screws provided to secure the faceplate bracket to the CURRENT STEP 5 Restore power by turning the breaker back on Blinking fast: Ready for Easy Mode Blinking slow: Ready for AP Mode Solid: Device power on STEP 6 Once power is connected,the blue indicator light will blink to indicate that CURRENT is ready to connect to Wi-Fi.
5 Connect: Easy Mode STEP 1 Open the Geeni app. In the top corner of the Devices screen, click (+). Choose “Smart Power“. STEP 2 Make sure CURRENT’s light is rapidly flashing blue. If not, reset to reach Easy Mode to connect (Page 9). Press “Next Step” in the app. 10 STEP 3 Enter your Wi-Fi network and password. STEP 4 The Geeni app will connect to CURRENT. NOTE: Geeni can’t connect to 5GHz networks. *If the connection fails, try to connect using AP Mode.
6 Connect: AP Mode STEP 1 Make sure CURRENT’s light is slowly flashing blue. If not, reset to reach AP mode (page 9). STEP 2 Open the Geeni app. In the top corner of the Devices screen, click (+). STEP 3 Press “Next” and enter your Wi-Fi details. STEP 4 Follow the instructions to choose the device from your Wi-Fi list. STEP 5 The Geeni app will connect to CURRENT. Choose “Smart Power“. Choose “AP Mode” in the top corner. 12 NOTE: Geeni can’t connect to 5GHz networks.
Frequently Asked Questions 1. Can I share with family and friends? Yes, you can share access to CURRENT and any other Geeni device. In the Geeni app, press the “Profile” button and click on “Device Sharing” to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Geeni app and registered an account. 2. Can I group multiple Geeni devices together? Yes, you can group multiple same-type devices by room, location, or however else you want.
Troubleshooting FCC Notice: Reset the device Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Can’t connect to Wi-Fi? Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems.
Can’t connect? Need help? DO NOT RETURN THIS PRODUCT TO THE STORE Geeni support: support@mygeeni.
