Instructions / Assembly

54
Connecting to existing chime system.
Install:
Mode 1 - General Doorbell Installation
01.
Mount the bracket to
the desired wall with the
included screws.
02.
Install the camera in the
bracket and lock in with
the security screw.
01.
First turn off the power
breaker at your fuse box
for your existing doorbell
and chime. Ring your
doorbell to confirm it is
now off.
02.
Find your chime (most
likely a rectangular box
mounted inside and
around your front door)
and remove the cover.
03.
Loosen both screws in
the terminal, and hook
both connectors from
the chime adaptor
under each screw (refer
to image).
04.
Using the included
double-sided tape, affix
the chime adapter to
your box wherever there
is space and replace
the cover. Be sure to not
interfere with any other
parts of the chime.
STEP 2 : Installation
Install Install
05.
Connect your existing
doorbell wire to the
included wire terminals
and connect the
additional hooks to the
screws on the back of
the smart doorbell (refer
to image).
Either wire can be
connected to either
terminal
06.
Return to the fuse box
and turn the power back
on. The ring around the
smart doorbell button
should turn on and blink
red slowly. You are now
ready to connect to
Wi-Fi.
12~24V AC
flashing
red light