Instructions / Assembly

76
Mode 2 - Installation with Angled Wall Mount
Install & Connect (Eazy Mode) Connect (Easy Mode)
01.
In the Geeni app, on
the top corner of the
Devices screen, click
Choose “Video Doorbell”.
STEP 3 : Connect
Add device:
Easy Mode
02.
Be sure the ring around
the doorbell button is
flashing a red light. If
not flashing, insert the
reset pin into the reset
button and hold for ten
seconds.
flashing
red light
04.
The Geeni app will
attempt to connect.
When the ring on
the doorbell turns
blue, connection was
successful!
NOTE: Geeni can’t connect to
5GHz networks.
NOTE: If the connection fails,
try to connect using QR Code
Mode (See next section)
03.
Enter your Wi-Fi
network and password.
05.
Select which type
of chime you have,
determined from chime
installation steps.
01.
For a desired tilted
angle, attach the initial
bracket to the angled
mount
02.
Install the angled mount
to the wall with the
included screws.
03.
Install the camera in the
bracket /angled mount
and lock in with the
security screw.