Instructions / Assembly

1110
05.
Select which type
of chime you have,
determined from chime
installation steps.
06.
(Optional) Insert your
MicroSD card into the
port located at the
bottom of doorbell. This
is not necessary for live
view, but is required to
record and play back
footage.
07.
Replace camera back
into mount and secure
with security screw.
Your smart doorbell is
now ready to use!
*How do I reset the
device and what does
the blinking light
mean?
Reset the doorbell by
inserting the reset pin
into the reset button,
located beneath the
doorbell button. Press
and hold for 5 seconds.
Insert microSD
card into the
microSD port
Frequently Asked Questions
Can I share with family and friends?
Yes! You can share access to all Merkury devices— cameras,
plugs, bulbs, doorbells, etc.— with family & friends. In the
Geeni app, press the “Profile” button and click on “Device
Sharing” to give or revoke sharing permissions. In order to
share, the other user should have already downloaded the
Geeni app and registered an account.
How much footage can the doorbell camera record?
An optional microSD card is required to record footage.
Depending on video quality, your smart doorbell will use
around 1GB of storage a day, so a 32GB card can provide
weeks of continuous video. As the card fills up, the oldest
footage will automatically be replaced by new video, so you
don’t have to ever worry about running out of
storage space.
My device has a funny name. How do I rename it?
From your main device list, click on one of the devices you
want to rename, press the “•••” button on the top right for
advanced settings, and click Modify Device Name (or Modify
Group Name, if applicable). You’ll then be able to choose a
more familiar name.
The bulb appears offline or unreachable, what should I do?
Check the light switch and make sure that it’s switched ON.
The light bulb requires an “always-on” power supply to
operate properly. Make sure your Wi-Fi router is online and
in range. Make sure you have the latest Geeni functionality by
clicking “Check for firmware update” in your device settings.
What’s the Wireless Range?
The range of your home Wi-Fi is heavily dependent on your
home router and the conditions of the room. Check with your
router specifications for exact range data.
If my Wi-Fi/Internet goes down, will Geeni still work?
Merkury products need to be connected to Wi-Fi in order to
use them remotely.
Questions. Troubleshooting. NoticesConnect (QR Code Mode)
Troubleshooting
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the
Wi-Fi setup. Check whether there are any Internet connection
problems. If the Wi-Fi signal is too weak, reset your Wi-Fi
router and try again.