User manual

1
READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE 1X8 VGA CAT5 DA SYSTEM
• Use industry standard Category-5 (CAT-5) cable to operate the 1x8 VGA CAT5
DA system. CAT-5e cable is preferred.
• Please connect all the cables between the computer and the 1x8 VGA CAT5 DA
system before powering up the 1x8 VGA CAT5 DA Sender unit.
• The 1x8 VGA CAT5 DA units are housed in a metal box for better RF shielding.
OPERATION NOTES
One VGA Input, Eight VGA Outputs The 1:8 VGA CAT5 Distribution Amplifi er is the
perfect solution for anyone who needs to send one source to multiple displays in re-
mote locations at the same time. The 1:8 VGA CAT5 Distribution Amplifi er has eight
RJ-45 output connector and one VGA input. The 1:8 VGA CAT5 Distribution Ampli-
fi er's RJ-45 connectors are connected to up to eight VGA CAT5 Distribution Amplifi er
receivers using industry standard CAT5 cables. The receivers can be placed up to
330 feet away from the transmitter.
How it Works
Simply connect your VGA video source to the 1:8 VGA CAT5 Distribution Amplifi er’s
input using the supplied VGA cable. Then connect up to eight VGA displays to the
VGA CAT5 receivers over 330 feet using CAT-5 Cable. Then power the 1:8 VGA
CAT5 Distribution Amplifi er and the receivers will get power from the CAT5. Note:
VGA output 1 is the primary connection and is used for the main display.
INTRODUCTION