User manual

HOW TO ADJUST THE PICTURE
6
The fi rst step in adjusting the video quality is to display text and a graphic on your monitor
(i.e. desktop icons). Then set your computer to the resolution that you will be using most
frequently. The dip switches are used to set the focus and sharpness of the picture to
the best possible setting. Set the dip switches to the settings that are recommended
for the different lengths of CAT5 cable (see chart below). Verify that the picture quality
is to your satisfaction. If the recommended setting does not produce a great quality
picture, try using a different dip switch setting. The trim pod next to the VGA connector
on the 1x8 VGA CAT5 DA R allows brightness adjustments for video.
0-25 Feet All dip switches OFF for all colors.
26-100 Feet Set dip switch #1 ON all colors. 2,3,4 remain OFF.
101-200 Feet Set dip switch #2 ON all colors. 1,3,4 remain OFF.
201-300 Feet Set dip switch #3 ON all colors. 1,2,4 remain OFF.
301 Feet and Up Set dip switch #4 ON all colors. 1,2,3 remain OFF.
NOTE: The dip switches are set to the OFF position when the switch is closest to the
number or in the down position.