User manual

CONNECTING AND OPERATING THE CAT5-5600HD

How to Connect the CAT5-5600HD

1. Connect the DVI source to the Sender Unit using the included DVI cable.

Another DVI cable can be used to connect a second DVI source to the

Sender Unit.

2. Connect the included USB cable from the computer to the Sender Unit.

3. Connect the DVI display(s) and USB devices to the Receiver Unit. Up to

four (4) USB devices can be connected to the Receiver Unit.

4. Connect the Sender and Receiver units together with up to 200 feet of CAT-

6a or up to 150 feet using CAT-5e cable. Be sure to make the corresponding

connections between the Sender Unit and Receiver Unit (e.g. DVI 1 on the

Sender Unit to DVI 1 on the Receiver Unit, etc).

5. Connect the included 5 V DC power supplies to both the Sender and

Receiver units.

6. The remote computer can now be controlled from the Receiver unit.

NOTE: USB cannot be extended by itself. A video signal must be present in

order to extend USB.

Wiring Diagram for the CAT5-5600HD

EXT-CAT5-5600HD

Sender

Receiver

Computer

DVI Monitor

USB CABLE

DVI CABLE

CAT-6 CABLE

(Up To 200 FT)

USB Mouse

USB Keyboard

USB Printer

USB External HDD