User manual

10
DIP SWITCH CONFIGURATION
Sender Unit
The Gefen CAT5-5600HD contains DIP switches on the bottom of the Sender
Unit. Each DIP switch performs a different function.
DIP Switch 1 - Green Mode (Default = ON)
• OFF - Enable Green Mode
When DIP switch 1 on the Sender Unt is set to the OFF position, the CAT5-
5600HD is placed in Green Mode. In this mode, the USB devices are not
powered if the USB cable from the Sender Unit to the computer source is
disconnected. Automatic Power Mode consumes less than 1 Watt of power.
• ON - Disable Green Mode
If DIP switch 1 is set to the ON position, then the CAT5-5600HD is placed
in Power Always Mode. In this mode, the USB ports are always powered
whether or not a USB cable is connected from the computer to the Sender
Unit.
DIP Switch 2 - Not Used
• Reserved for future expansion.
Two DIP switches located
on the bottom of the CAT5-
5600HD Sender Unit. There
are two sets of DIP switches
on the Sender Unit: One for
each DVI input.