User manual

28
RS-232 / TELNET COMMANDS
EDID Management
Command Description
#edidbatolo ReaddownstreamEDIDandstoresinanyLocalInput
#ediddetolo SettodefaultEDIDonLocalInput
#ediddstoba ReaddownstreamEDIDandstoresinEDIDBank
#ediddstolo ReaddownstreamEDIDandstoresintoaLocalEDID
#lock_edid LocksLocalEDIDanddisablesauto-loadingafterpower-up
#prbaedid ReaddownstreamEDIDfrombankandsendstoserialport
#prdsedid ReaddownstreamEDIDandsendstoserialport
#predidst SpoolstheEDIDdetailstotheserialport
#prloedid ReadInputLocalEDIDandsendstoserialport
#edidbatolo Command
The#edidbatolocommandreadsanEDIDfromanEDIDbankandstoresittoanylocal
input.

Syntax:
#edidbatolo param1 param2[...param9]
Parameters:
param1   EDIDbankoffset   [1-20]
param2 - param9 Inputlist    [1-32]
Notes:
Ifparam2 = 0,thentheEDIDinthespeciedbankiscopiedtoall32DVIinputs.Ifmore
thaneightinputsneedtobespeciedinordertoreceivetheEDIDinthespeciedbank,
the#edidbatolocommandmustbeexecutedtwice.
Examples:
#edidbatolo 2 5 6 7
Loading EDID bank 2 to locals EDID, please wait......
Finished Loading
#edidbatolo 2 0
Loading EDID bank 2 to all locals EDID, please wait........
Finished Loading