User manual

29
RS-232 / TELNET COMMANDS
#ediddetolo Command
The#ediddetolocommandstorestheDefaultEDIDinanyLocalEDID.
Syntax:
#ediddetolo param1[...param9]
Parameters:
param1 - param9  Inputlist    [1-32]

Notes:
Ifparam1 = 0,allinputswillreceivethedefaultEDIDoruseparam1-param9tospecify
individuallocalinputswhichwillreceivethedefaultEDID.Ifmorethaneightinputsneedto
bespecied,thenthe#edidbatolocommandmustbeexecutedtwice.

Examples:
#ediddetolo 2 3 4 5 6 7 8 9
Loading default EDID to locals, please wait..........
Finished Loading
#ediddetolo 0
Loading default EDID to all locals EDID, please wait.......
Finished Loading