User manual

31
RS-232 / TELNET COMMANDS
#ediddstolo Command
The#ediddstolo commandreadsthedownstreamEDIDandstoresittoalocalinput.
Syntax:
#ediddstolo param1 param2[...param9]
Parameters:
param1   Adownstreamdisplay  [1-32]
param2 - param9  Inputlist    [1-32]


Notes:
Ifparam2 = 0,thenthedownstreamEDIDisstoredinall32DVIinputs.Ifmorethaneight
inputsneedtobespeciedinordertoreceivethedownstreamEDID,the#edidsdtolo
commandmustbeexecutedtwice.

Examples:
#ediddstolo 1 3 8 9 10
Loading Output 1 EDID to locals EDID, please wait........
Finished Loading
#ediddstolo 1 0
Loading Output 1 EDID to all locals EDID, please wait......
Finished Loading