User manual

40
RS-232 / TELNET COMMANDS
#set_http_port Command
Speciesanewport.Theunderscorecharacter(“_”)mustbeincludedwhen
typingthecommandname.
Syntax:
#set_http_port param1


Parameters:
param1   Port    [0-255]

Notes:
Arebootisrequiredafterusingthiscommand.
Example:
#set_http_port 72
New HTTP port set to: 72
#ipcong
-------------- TCP/IP settings -------------
MAC add = 00:1C:91:02:80:18
IP add = 192.168.1.75
Net Mask = 255.255.255.0
Gateway = 192.168.1.254
Web Server Port = 72
Telnet Server Port = 23
Telnet password at login is set to OFF
Telnet welcome at login is set to OFF