User manual

43
RS-232 / TELNET COMMANDS
#set_telnet_username Command
The#set_telnet_usernamecommandassignstheTelnetusernameforlogin.
Theunderscorecharacter(“_”)mustbeincludedwhentypingthecommandname.
Theusernamemaycontainacombinationoflettersandnumbers.Specialcharacters
andspacesarenotpermitted.Ifaspaceisrequiredintheusername,usetheunderscore
character(“_”).
Syntax:
#set_telnet_username param1

Parameters:
param1   Username [20charactersmax.]

Example:
#set_telnet_username doc_holiday
Telnet login updated to: doc_holiday
#sgateway Command
SpeciesthenewIPgateway.TheIPaddressmustbetypedusingDot-decimalnotation.
Syntax:
#sgateway param1


Parameters:
param1   IPaddress
Notes:
Arebootisrequiredafterusingthiscommand.
Example:
#sgateway 192.168.1.1
New IP Gatway set to: 192.168.1.1