User manual

47
RS-232 / TELNET COMMANDS
#use_telnet_pass Command
The#use_telnet_passcommandenables/disablestheTelnetpasswordonlogin.
Syntax:
#use_telnet_pass param1


Parameters:
param1   Telnetpasswordusestate  [0-1]
Value Meaning
0 Off
1 On

Notes:
Arebootisrequiredafterusingthiscommand.

Example:
#use_telnet_pass 0
Telnet password at login is set to OFF
#use_telnet_pass 1
Telnet password at login is set to ON