User manual

49
RS-232 / TELNET COMMANDS
#unmaskout Command
The#unmaskoutcommandre-enabled(unmasks)thespeciedoutputsonthematrix.


Syntax:
#unmaskout param1[...param8]


Parameters:
param1 - param8 Output   [1-32]
Notes:
Ifparam1 = 0,alloutputswillbemasked.Ifmorethaneightinputsneedtobespecied,
thenthe#maskoutcommandmustbeexecutedtwice.
Examples:
#unmaskout 5 6 7
Activate outputs: 5 6 7
Activate Output 5
Activate Output 6
Activate Output 7
#unmaskout 0
Activate all outputs
Activate all Outputs