User manual

56
RS-232 / TELNET COMMANDS
System
Command Description
#activebolo Activatesthebootloader
#fadefault Resetsthematrixtofactorydefaultsettings
#help Displaysthelistofavailablecommandsorhelponaspecic
command
#lock_fo Unlocks/locksthe+5Vpowerlockstate
#reboot Rebootsthematrix
#set_input_name Speciesanameforthedesignatedinput
#set_output_name Speciesanameforthedesignatedoutput
#show_temp Displaystheinternalboardtemperatures
#show_ver_data Displaysthecurrenthardwareandrmwareversion
#show_voltage Displaystheinternalboardvoltages
f Enables/disables+5Vontheinputs
#activebolo Command
The#activebolocommandactivatesthebootloaderwhenupdatingthermware.Referto
theFirmwareUpdateProcedurebeginningonpage67onhowtousethiscommand.


Syntax:
#activebolo


Parameters:
None
Notes:
Thiscommandmustbetypedandexecutedtwiceinordertoactivatethebootloader.
Example:
#activebolo