User manual

57
RS-232 / TELNET COMMANDS
#fadefault Command
The#fadefaultcommandresetsthematrixtothefactorydefaultsettings.
ExecutingthiscommandwillerasealllocalmemoryEDIDbanks,resetthe
matrixtodefaultroutingstatus(1-1,2-2,etc),andclearallIPsettings.
Syntax:
#fadefault

Parameters:
None
Notes:
Arebootisrequiredafterusingthiscommand.
Example:
#fadefault
Matrix set to factory default, Please wait
Routing 1-1,2-2,...
Activate all Outputs
Loading default EDID to all locals EDID, please wait.......
Finished Loading


#fw_upgrade Command
The#fw_upgradecommandisnotusedinthisversionofrmware.
Thiscommandwillbeavailableinafuturerelease.
Syntax:
Thiscommandwillbeavailableinafuturerelease.

Parameters:
Thiscommandwillbeavailableinafuturerelease.