User manual

59
RS-232 / TELNET COMMANDS
#lock_fo Command
The#lock_focommandlocks/unlocksthe+5Vpowerlockstate.Enablingthisfeaturewill
storethe5Vstatusforeachinputpriortoshuttingtheunitdown.Thispreservesthe5V
statewhentheunitisrestarted.Enablingthisfeatureshouldbeusedwhenattachingber
opticextenderstotheoutputsonthematrix.


Syntax:
#lock_lo param1

Parameters:
param1 State    [0-1]
Value Meaning
0 DisablePowerLock
1 EnablePowerLock
Example:
#lock_lo 1
Enable lock Power mode
#lock_lo 0
Disable lock Power mode