User manual

60
#reboot Command
The#rebootcommandrebootsthe32x32DVIMatrix.Theparameter10mustbeincluded
aspartofthecommand.UnlikeRS-232,ifthe#rebootcommandisenteredviaTelnet,the
Telnetconnectionwillbelostandwillneedtobemanuallyre-established.

Syntax:
#reboot param1

Parameters:
param1 10

Example:
#reboot 10
The system will reboot itself, please wait
***********************
GEFEN
MultiMatrix 32 x 32
FW version: 0.2.35
***********************
Establish connection with Input Board 1
Board Type: DVI input 8 channels
Board SN: 941651
FW ver:0.1.26
Establish connection with Input Board 2
Board Type: DVI input 8 channels
Board SN: 941655
FW ver:0.1.26
...
...
Establish connection with BP Board
Board Type: BP
Board SN: 945889
FW ver:0.2.30
Init Routing, Please wait
..
Loading Output 1 EDID to all locals EDID, please wait.....
Finished Loading
RS-232 / TELNET COMMANDS