User manual

62
#set_output_name Command
The#set_output_namecommandnamesthespeciedoutput.Thisfeaturemakesiseasier
tokeeptrackofeachoutputdeviceduringtheroutingprocess.Theoutputnamemay
containacombinationoflettersandnumbers.
Specialcharactersandspacesarenotpermitted.Ifaspaceisrequiredaspartoftheout-
putname,usetheunderscorecharacter(“_”).

Syntax:
#set_output_name param1 param2


Parameters:
param1   Output    [1-32]
param2   String(15charactersmax.)
Example:
#set_output_name 2 LCD_display
LCD_display is assigned to output 2
RS-232 / TELNET COMMANDS