User manual

87
FIRMWARE UPDATE
Firmware Update Procedure
Thefollowingitemsarerequiredtoupdatermware:
• ComputerrunningWindowsXP
• RS-232cable(donotuseanull-modemcable)
• Firmwareles(i.e..binles)
• GefenPRO32x32DVIMatrix
TobegintheupdateprocedurethematrixBootLoadermustbeactivated.Toactivatethe
BootLoaderpleasefollowtheprocedurebelow:
1. Power-onthematrix.
2. ConnectanRS-232cabletothePCandopentheterminalprogramusingthe
followingsettings:

Baudrate: 19200
Stopbits: 1
Databits: 8
Flowcontrol: None
3. Typethecommand:#activebolo
4. Thefollowingshouldbedisplayedontheterminalscreen:

The System detect FW on memory: DVI8_IN/OUT boards
To activate this board boot loader please type the command
again with the parameter 5
To activate other board boot loader please type the
command
again without any parameters
5. Typethecommand:#activebolo
Thiswillbegintheupdateprocessofthemainboard.