User manual

88
FIRMWARE UPDATE
6. Thefollowingtextshouldappearontheterminalscreen:

Activate new FW download boot loader
=====================================================
== Gefen MMTX Boot Loader ==
== v 3.4
==
=====================================================
Program on SPI memory don’t match to UI board FW name,
aborting !
Fail on reading UI FW from SPI ash
start serial port boot loader
==================== Main Menu ======================
Download new program ---------------------------- 1
Cancel ------------------------------------------ 2
=====================================================
7. Press[1]onthecomputerkeyboardtobegindownloadingprogramtotheash
memory.
8. Amessagewillappearintheterminalprogram

Waiting for the le to be sent ... (press ‘a’ to abort)
9. InHyperterminal,clickTransfer>Sendle...
10. ClickBrowse...andselectthele:MMTX_UI_e_0_2_31.bin
11. SelectYmodemfortheprotocol.
12. PressSendontheSendFiledialogbox.
13. AmessagewillappearinHyperterminal:

Programming Completed Successfully!
-----------------------------------
Name: MMTX_UI_e_0_2_31.bin
Size: 403072 Bytes
------------------
14. TheunitwillexitthebootloaderscreenandreturntothestandardHyperterminal
window.
15. Repeatsteps3-11forthele:MMTX_BP_e_0_2_26.bin