User manual

9
RMT-8HDS-IR REMOTE CONFIGURATION
How to Resolve IR Code Confl icts
In the event that IR commands from other remote controls confl ict with the
supplied RMT-8HDS-IR remote control, changing the remote channel will
alleviate this issue. The RMT-8HDS-IR remote control has DIP SWITCHES
for confi guring the remote channel. The Scaler must match the remote
channel set in the RMT-8HDS-IR remote control. Please see page 18 for
instructions on how to confi gure the channel on the Scaler. By default, both
the Scaler and the RMT-8HDS-IR remote control are set to Channel 1.
Remote Channel 1:
(Default)
Remote Channel 3:
1 2
Remote Channel 2:
1 2
1 2
Remote Channel 4:
1 2
Left: Picture of the opened rear battery com-
partment of the RMT-8HDS-IR remote show-
ing the exposed DIP Switch bank
between the battery chambers.
DIP Switch IR Channel Settings