User manual

CONNECTING AND OPERATING THE 3GSDI TO HDMI 1.3 SCALER
Controlling the 3GSDI to HDMI 1.3 Scaler
The 3GSDI to HDMI 1.3 Scaler has a built in GUI (Graphical User Interface) for
navigating the various functions, otherwise known as the On-Screen Display or
OSD. The OSD is navigated by the included IR remote control. Please see the
RMT-8HDS-IR Remote Description on page 7 for functional information.
Entering the Menu System
Pressing the Menu button on the included RMT-8HDS-IR remote control will display
the OSD for performing operations.
The OSD is overlaid onto the outgoing video to the display. Therefore, the selected
source must be outputting a compatible resolution for viewing on the display. If video
is not visible on the display, the OSD will also fail to be displayed. To correct this,
please follow the steps below:
1. Verify that the source is on and outputting a video signal.
2. Verify that the RMT-8HDS-IR remote channel is in the default position.
(See Page 9)
3. Verify that the Scaler is selected to the chosen source.
4. Press the Output button on the RMT-8HDS-IR remote control to cycle through
output resolutions until video is displayed. Please see page 11 for a listing of the
available output resolutions and cycle order.
5. Navigation
Use the directional buttons to navigate the menu system. Press the OK button
to enter a sub category and also to select a menu item for adjustment. Use the
Left and Right buttons to adjust the selected menu item. Press the EXIT or OK
button to return to the previous menu. Use the LEFT and RIGHT buttons to
adjust selected options. Pressing the EXIT button while in the main menu will
exit out of the menu system.
IMPORTANT:
When using the remote, do not press multiple buttons simultaneously or rapidly.
These actions will cause the remote to reset and the power-on/initialization
sequence on page 6 will have to be repeated.
10