User manual

20
Clean Aperture
CONNECTING AND OPERATING THE 3GSDI TO HDMI 1.3 SCALER
The clean aperture size and position can be confi gured. You can set the percentage (as
a function of the production aperture) of the signal that is active. By default the horizontal
and vertical size is set to 100% and centered at 50, 50 as the horizontal and vertical
position. Note that if no video signal input is detected this menu is disabled.
Figure 18 - Clean Aperture
The fi lm mode feature can be enabled or disabled. It produces a progressively scanned
output image from an interlaced scanned input image accounting for fi lm mode
cadence (e.g. 3:2 / 2:2 pull-down) including bad edit detection, static / freeze frame,
multi-directional motion and inter-fi eld motion.
Film Mode
Figure 19 - Film Mode