User manual

21
SDI Audio Channel
CONNECTING AND OPERATING THE 3GSDI TO HDMI 1.3 SCALER
IR Remote Channel
The Scaler’s IR remote control transmits IR codes on a single infrared channel. A total
of four (4) channels are available for use by the Scaler and its IR Remote. If the remote
control and/or Scaler becomes inoperable due to a confl ict with another IR device in the
nearby vicinity, the IR channel may be changed. The IR channel must be changed both
within the Scaler OSD (see below, Figure 21) and inside the back panel of the IR remote
next to the battery compartment (see page 8).
This menu selects the number of audio channel(s) to be extracted from the SDI video input.
Figure 20 - Audio
Figure 21 - Remote Channel