User manual

CONNECTING AND OPERATING THE 3GSDI TO HDMI 1.3 SCALER

The Extract command takes a subset (cropping) of the SD/HD/3G-SDI source picture and

replicates that portion only to the HDMI output device. The extraction size (crop size) can

be selected in the OSD menu. By default 100% of the picture is extracted.

Extracting a Subset of the Source Signal

Figure 32 - Extract (Crop Portion of Screen)

The Through mode does not resize or scale the picture. For example, a 1280x720p HD-SDI

input signal sent to an HDMI output device with a greater native resolution than 1280x720

will have horizontal and vertical black bars on the outer edges of the centered image being

received from the Scaler. Horizontal and vertical size can be selected from the OSD menus

and the output format can be reduced from 100% (1280x720p) down to as little as 1%.

The position where the selection window is deﬁ ned can be modiﬁ ed with the horizontal and

vertical position slider controls (see Figure 33 below). The default screen position is 50 for

both horizontal and vertical positions.

Through Mode

Figure 33 - Through (No Scaling)