User manual

OPERATION NOTES
• The built-in GUI (Graphical User Interface) or On-Screen Display (OSD)
provides convenient operation of the Scaler. The supplied IR Remote
control operates the OSD. Page 10 and following cover OSD functions.
• The IR Remote’s operating channel must be identical to that of the Scaler.
Please see page 9 for complete details on how to confi gure the IR Channel.
• The 3GSDI to HDMI 1.3 Scaler supports many input and output resolutions.
For a complete list of supported formats, see the tables on pages 10 and 11.
• Supports SMPTE standards 259M, 292M, SMPTE 274M, SMPTE 296M,
ITU-R BT.656 and ITU-R BT.601. Handles 3G-SDI hvv 425-A and 425-B /
formats 1080P 50/59.94/60.
• Supports HDMI 1.3 with 225 MHz Video Bandwidth, 10-bit Deep Color
(RGB & YCbCr 4:4:4 only), and up to 8 channels of converted SDI audio
embedded into HDMI.
• Internal software (fi rmware) may be upgraded via the built-in Serial or USB
ports. A DB9 serial cable is provided for this purpose. Note that software
updates performed on the USB port will be quicker due to its higher data
transfer rate.
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 3GSDI TO HDMI 1.3 SCALER
2