® CAT5•7500 EXT-CAT5-7500 USER MANUAL www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen, Inc. c/o Customer Service 20600 Nordhoff Street Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. CAT5•7500 is a trademark of Gefen Inc.
TABLE OF CONTENTS 1 INTRODUCTION 2 OPERATION NOTES 3 CAT5•7500S FRONT PANEL DESCRIPTIONS 4 CAT5•7500R FRONT PANEL DESCRIPTION 5 CAT5•7500S BACK PANEL LAYOUT 6 CAT5•7500S BACK PANEL DESCRIPTIONS 7 CAT5•7500R BACK PANEL LAYOUT 8 CAT5•7500R BACK PANEL DESCRIPTIONS 9 CAT5 WIRING DIAGRAM 10 HOW TO ADJUST THE PICTURE 11 RACK MOUNT DIAGRAM 12 WIRING DIAGRAM 13 SPECIFICATIONS 14 WARRANTY
INTRODUCTION Thank you for purchasing the new ex•tend•it CAT5•7500 series by Gefen, Inc. The ex•tend•it CAT5•7500 by Gefen allows users the benefits of extending VGA, USB, PS/2, RS232, and audio signals beyond the desktop. In a growing number of applications, broadcast stations and production facilities there is a need to locate a computer remotely, from the keyboard, mouse, and video monitor. A CPU may need to be shared between several users or moved to another room because of annoying fan noise.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE CAT5•7500 SYSTEM • Use industry standard Category-5 (CAT-5) cable to operate the CAT5•7500 system. CAT-5 E cable is preferred. • When monitors are used in the local and remote locations, the video monitors must be able to use the same resolution. This pertains to monitors placed remotely, and those divided between local and remote locations.
CAT5•7500S FRONT PANEL DESCRIPTION 1 Front Panel Function Description 1 POWER ON INDICATOR - Indicates that the unit is plugged in and powered.
CAT5•7500R FRONT PANEL DESCRIPTIONS Receiver Front Panel Function Description 1 F2 - Fine focus adjustment for monitor 2 2 B2 - Adjusts the brightness for monitor 2 3 F1 - Fine focus adjustment for monitor 1 4 B1 - Adjusts the brightness for monitor 1 5 POWER ON INDICATOR - Indicates that the unit is plugged in and powered on 4
CAT5•7500R FRONT PANEL DESCRIPTIONS 1 5 2 3 4 5
CAT5•7500S BACK PANEL DESCRIPTIONS 1 POWER - 5 VDC external power supply 2 MONITOR 1 - HD15 output connects to local monitor 1 3 VIDEO IN 1 - HD15 input from computer 4 MONITOR 2 - HD15 output connects to local monitor 2 5 VIDEO IN 2 - HD15 input from computer 6 CAT-5 VIDEO 2 - RJ-45 input extends video input 2 with CAT-5 cable 7 CAT-5 VIDEO 1 - RJ-45 input extends video 1 with CAT-5 cable 8 CAT-5 USB/AUD - RJ-45 input extends USB and audio 1 with CAT-5 cable 9 AUDIO IN 1 - Audio Mini Jack
4 2 1 11 12 13 3 14 15 16 17 5 6 7 8 9 10 CAT5•7500S BACK PANEL LAYOUT
CAT5•7500R BACK PANEL DESCRIPTIONS 1 POWER - 5 VDC external power supply 2 VIDEO OUT 1 - HD15 output connecting to the video monitor 1 3 VIDEO OUT 2 - HD15 output connecting to the video monitor 2 4 AUDIO OUT 1 - Audio mini jack connects to speakers 5 CAT-5 VIDEO 2 - RJ-45 input connects CAT-5 cable to receive extended video signals 6 CAT-5 VIDEO 1 - RJ-45 input connects CAT-5 cable to receive extended video signals 7 CAT-5 USB/AUDIO - RJ-45 input connects CAT-5 cable to receive extended USB a
1 9 2 10 11 3 12 4 13 5 14 6 15 7 8 CAT5•7500R BACK PANEL LAYOUT 7
9 1 8 8 7 6 5 4 3 2 1 RJ-45 Jack Brown White/Brown Green White/Blue Blue White/Green Orange White/Orange 8 7 6 5 4 3 2 1 1 8 RJ-45 Jack CAT5 WIRING DIAGRAM
CAT5 CABLE LENGTH SETUP Jumper settings are used to set the focus of the picture and characters to the best possible sharpness. The jumpers in the CAT5•7500R are set at the factory as shown in the diagram below. The first step to adjusting the video is to have the CAT5•7500S and CAT5•7500R connected together with the CAT-5 cable that is going to be used in the installation. Then set your computer to the resolution and refresh rate that you will be using most frequently be using.
CAT5•7500S RACK MOUNT DIAGRAM 11
WIRING DIAGRAM 12
SPECIFICATIONS Video Amplifier Bandwidth .................................................................................. 350 MHz Input Video Signal ......................................................................................... 1.2 Volts p-p Video In .................................................................................................................. HD-15 Focus/Brightness Control ............................................................................. 25 to 330 FT Video out .