Hardware manual

31
1. Plug the USB storage device to the Digital Signage Creator
2. Press the Format Now button.
All content of the USB storage device will be erased.
3. When the formatting is complete, unplug the USB storage device from the
Digital Signage Creator
4. Plug the USB storage device to the Digital Signage Creator.
NOTE: at this point content must be uploaded to the USB storage device using
the Digital Signage Creator WebDAV server.
If you are using a USB storage device in write mode, it is recommended to press
the Disconnect button before removing the device from the Digital Signage
Creator.
Administration > Media Sources > Basic > Detected USB Storage Devices
Click the Reload button to re-read the USB storage device. If the USB has been
hot-swapped (exchanged with another USB device), clicking the Reload button
will update the information on the new USB device.
CONNECTING AND OPERATING
THE DIGITAL SIGNAGE CREATOR