® DVI DL Super Booster Plus EXT-DVI-141DLBP User Manual www.gefen.com ® DVI DL Super Booster Plus EXT-DVI-141DLBP User Manual www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST (Pacific Standard Time) Write To: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen, LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
CONTENTS 1 Introduction 2 Features 3 Panel Layout 4 Connecting And Operating The DVI DL Super Booster Plus 5 Dip Switch Location 6 Specifications 7 Warranty CONTENTS 1 Introduction 2 Features 3 Panel Layout 4 Connecting And Operating The DVI DL Super Booster Plus 5 Dip Switch Location 6 Specifications 7 Warranty
INTRODUCTION Congratulations on your purchase of the DVI DL Super Booster Plus. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
FEATURES Features • Perfects video sent over long stretches of Dual-Link DVI cables • Extends DVI Dual Link displays away up to 200 feet • Supports resolutions up to 3840x2400 @ 60 Hz • Supports DDWG standards for DVI compliant monitors • DDC Signal is amplified for better robustness when interfacing • HDCP compliant Package Includes (1) DVI DL Super Booster Plus (1) 5V DC Power Suppy (1) User’s Manual 2 FEATURES Features • Perfects video sent over long stretches of Dual-Link DVI cables • E
PANEL LAYOUT Front Panel DVI In EQ Trim Control Power LED Back Panel DVI Out 3 PANEL LAYOUT Front Panel DVI In EQ Trim Control Power LED Back Panel DVI Out 3
CONNECTING & OPERATING THE DVI DL SUPER BOOSTER PLUS How to Connect the DVI DL Super Booster Plus 1. Connect the long DVI cable from the source into the “DVI In” on the front of the DVI DL Super Booster Plus. The DVI DL Super Booster Plus is placed next to your display to regenerate the DVI signal. 2. Connect a short DVI cable from the “DVI Out” connection in the back of the DVI DL Super Booster Plus to your display or projector 3. Plug the 5V DC power supply into the DVI DL Super Booster Plus. 4.
DIP SWITCH LOCATION ON Auto EQ Off 1 2 Manual EQ Long Cable ON 1 Auto EQ On 2 Manual EQ Short Cable Dip Switch 2 can be used to turn on the automatic equalization function. Use this setting for ease of setup as this mode will automatically tune out unwanted video noise. To do this, turn Dip Switch 2 to the ON position. No manual adjustments to the EQ can be made in this mode using the EQ Trim Pot on the front of the unit. Dip Switch 1 will not have any effect in this mode.
SPECIFICATIONS Video Amplifier Bandwidth .......................................................................................................2 x 165 MHz Input Video Signal ................................................................................................................... 1.2 Volts p-p Input DDC Signal .............................................................................................................. 5 volts p-p (TTL) Maximum Dual Link Range .....................................
