2 DVI Audio Dual Link : 3GSDI Embedder Distribution Amplifier EXT-DVI-142DLN User Manual Release A2
1:2 DVI Dual Link Distribution Amplifer Important Safety Instructions GENERAL SAFETY INFORMATION 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this product near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
1:2 DVI Dual Link Distribution Amplifer Warranty Information Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.
1:2 DVI Dual Link Distribution Amplifer Contacting Gefen Technical Support Gefen, LLC c/o Customer Service 20600 Nordhoff St. Chatsworth, CA 91311 Telephone: (818) 772-9100 (800) 545-6900 Fax: (818) 772-9120 Email: support@gefen.com Visit us on the Web: www.gefen.com Technical Support Hours: 8:00 AM to 5:00 PM Monday - Friday, Pacific Time 1:2 DVI Dual Link Distribution Amplifier is a trademark of Gefen, LLC.
3GSDI 1:2 DVIAudio Dual Link Embedder Distribution Amplifer Operating Notes • There is no internal scaling in the 1:2 DVI Dual Link Distribution Amplifer. All of the attached monitors must be able to display the output resolutions of the source device.
1:2 DVI Dual Link Distribution Amplifer Features and Packing List Features • Split a dual link DVI signal to two DVI dual link outputs • Allows simultaneous display • Supports single-link resolutions up to 1920 x 1200, and dual-link up to 3840 x 2400 • Power On indicator • DVI Link indicators • Supports DDWG standard for DVI compliant monitors • HDCP pass-through only on output #1 1080P Packing List The 1:2 DVI Dual Link Distribution Amplifier ships with the items listed below.
3GSDI 1:2 DVIAudio Dual Link Embedder Distribution Amplifer Table of Contents 01 Getting Started Panel Layout.......................................................................................................... 2 Front Panel..................................................................................................... 2 Back Panel..................................................................................................... 3 Installation...................................................
ix
1: 2 DVI Dual Link Distribution Amplifier 01 Getting Started Panel Layout.......................................................................................................... 2 Front Panel..................................................................................................... 2 Back Panel..................................................................................................... 3 Installation......................................................................................
Getting Started Panel Layout Front Panel 1 2 3 5 4 ID Name Description 1 5V DC Connect the included 5V DC power supply to this power receptacle. 2 DVI In Connect the DVI source to this port using the included dual-link DVI cable. 3 1 This LED indicator will glow bright green once a display is connected to DVI Out 1. 4 2 This LED indicator will glow bright green once a display is connected to DVI Out 2. 5 Power This LED indicator will glow bright blue when the unit is powered.
Introduction Getting Started Panel Layout Back Panel 1 2 ID Name Description 1 DVI Out 1 Connect a dual link DVI display to this port using a dual-link DVI cable. 2 DVI Out 2 Connect a dual link DVI display to this port using a dual-link DVI cable.
Getting Started Installation Page Title Connecting the 1:2 DVI Dual Link Distribution Amplifier 1. Connect the included dual-link DVI cable from the DVI source to the DVI In port on the distribution amplifier. 2. Connect the DVI cable from the first display to the DVI Out 1 port on the distribution amplifier. 3. Connect the second display to the DVI Out 2 port on the distribution amplifier. 4. Connect the included 5V DC power supply to the power receptacle on the distribution amplifier. 5.
page | 5
1: 2 DVI Dual Link Distribution Amplifier 02 Appendix Specifications.........................................................................................................
Appendix Specifications Supported Formats Resolutions (max.) • • 1920 x 1200 (WUXGA) 3840 x 2400 (WQUXGA) Maximum Pixel Clock • 2 x 165 MHz Input Video Signal • 1.2V p-p Input DDC signal • 5V p-p (TTL) Power Indicator • 1 x LED, blue Link Indicators • 2 x LED, green Video Input • 1 x DVI-D, 29-pin, female Video Outputs • 2 x DVI-D, 29-pin, female Power Input • 1 x 5V DC Power Consumption • 5W (max.
Stretch it. Switch it. Split it Gefen’s got it. ® 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com Pb This product uses UL or CE listed power supplies.
