User manual

7
1 Equalization Adjustment (Trim Pot Control)
The EQ adjustment or Trim Pot is used to equalize the signal to compensate for
the extension distance and the quality/skew variances that are found in different
CAT6a cabling brands.
2 DVI Output Connector This connector hooks up the Receiver to a DVI-D
compliant monitor at the remote destination.
3 5V DC Power Receptacle
Connect the included 5V DC power supply between this input and an open wall
power socket.
4 Power LED Indicator
The LED power indicator will become active once the included 5V DC power
supply is properly connected beten the unit and an open wall power socket.
5 RJ-45 Link Port
This port is used to connect the DVI Extender Sender and Receiver units
together using a CAT6a cable.
RECEIVER PANEL DESCRIPTIONS