User manual

How to Connect the DVI over one CAT6 Extender

1. Connect a DVI-D cable (one is supplied) between the DVI output on a

source device and the DVI input connector on the DVI over one CAT6

Extender sender unit.

2. Connect a single CAT6a cable between the sending and receiver units.

NOTE: When ﬁ eld-terminating CAT6a cabling please adhere to the TIA/EIA-

568-B speciﬁ cation. Please see page 12 for more information.

3. Connect a DVI-D cable (user-supplied) between the DVI input on a DVI-

compliant output device (i.e. computer display) and the DVI output on the

DVI over one CAT6 Extender receiver unit.

4. Connect the included 5V DC power supplies (two are included) between the

sender and receiver units and available power outlets.

5. Power up the DVI output device (i.e. DVI computer monitor) ﬁ rst and the DVI

source device (i.e. computer) last.

Wiring Diagram for the DVI over One CAT-6 Extender

EXT-DVI-1CAT6

Sender

Receiver

DVI Source

DVI Display

DVI CABLE

CAT-5 CABLE

(Up To 200 Ft)

CONNECTING AND OPERATING THE

DVI OVER ONE CAT-6 EXTENDER