User manual

9
CONNECTING AND OPERATING THE
DVI OVER ONE CAT-6 EXTENDER
Adjusting the Signal Quality
The DVI over one CAT6 receiver unit has a equalization device called a Trim
Pot (trim potentiometer) to compensate for the extension distance and the quality/
skew variances that are found in different CAT6a cabling brands. If there is no output
video or if output video contains video artifacts and/or video noise such as snow,
please use the steps below to adjust the Trim Pot.
1. Insert a small fl at-headed tool into the Trim Pot on the front panel of the
receiver unit.
2. The Trim Pot has 8 set positions. Turn the Trim Pot in a clockwise fashion
until it clicks into the next position. Continue adjusting the Trim Pot by trying
all 8 positions until the issue is resolved.
3. Carefully remove the adjustment tool.
Trim Pot