User manual

11
DIP SWITCH CONFIGURATION
DIP Switch Settings
DIP 1 - EDID Management
• OFF - Local EDID
When Local EDID mode is used, the EDID will be assembled by copying
all video and audio features of the connected output device. Deep Color
support will be manually controlled using DIP switch 2 (see DIP 2 - Deep
Color, below).
• ON - Pass-through EDID
Allows all video and audio features of the connected devices to be passed
to the source device without control over Deep Color. By default, the unit is
shipped with DIP 1 in the ON position.
DIP 2 - Deep Color
• OFF - Disables Deep Color support
Disables Deep Color in the EDID. Deep Color management is only available
when Local EDID is being used (DIP 1 = ON).
• ON - Enables Deep Color support
Enables Deep Color support. In Pass-through EDID Mode, setting DIP 2 =
ON has no effect since all EDID information is passed through.