User Guide

5
PANEL DESCRIPTIONS
Display 1 Selected Source LED1
The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 1 will be indicated by an
active LED.
Display 2 Selected Source LED2
The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 2 will be indicated by an
active LED.
Display 3 Selected Source LED3
The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 3 will be indicated by an
active LED.
Display 4 Selected Source LED4
The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 4 will be indicated by an
active LED.
IR Receiver5
This IR receiver will receive commands from the included RMT-16-IR remote control.
IR Extension Port6
Connect an optional IR extension (part# EXT-RMT-EXTIR) to this port.
Power LED Indicator7
This LED will become active once the included 5V DC power adapter is properly connected.
RS-232 Serial Control Interface8
Use the commands on page 10 to control the 4x4 DVI DL Matrix using the RS-232 interface.
DVI Input 19
Connect a DVI DL source to this input.
DVI Input 210
Connect a DVI DL source to this input.
DVI Input 311
Connect a DVI DL source to this input.
DVI Input 412
Connect a DVI DL source to this input.
DVI Output 113
Connect a DVI DL display to this port.
DVI Output 214
Connect a DVI DL display to this port.
DVI Output 315
Connect a DVI DL display to this port.
DVI Output 416
Connect a DVI DL display to this port.
Locking 5V DC Power Adapter Input17
Connect the included 5V DC power adapter to this port.