User`s manual

RS-232 SERIAL COMMUNICATION COMMANDS, CONT’D

Print EDID bank

This function reads EDID data from the EDID bank and sends it to the serial port.

#PRBAEDID_param1_param2\r

Parameter Name Value

EDID bank offset [1 : 7 ]

Send BIN ﬁ le 0

2 Send TXT ﬁ le 1

Load EDID to Locals EDID

This function loads EDID data through the serial port and stores it in any Input’s

Local EDID memory bank.

#LOEDIDTOLO_param1_param2\r

Parameter Name Value

1 Semi echo mode 0

Full echo mode 1

2 EDID.bin ﬁ le(128 bytes) 1

EDID.bin ﬁ le(256 bytes) 2

Load EDID to EDID bank

This function loads EDID through the serial port and stores it in the EDID bank.

Parameter Name Value

Semi echo mode 0

Full echo mode 1

EDID.bin ﬁ le(128 bytes) 1

EDID.bin ﬁ le(256 bytes) 2

3 EDID bank offset [1 : 7 ]

Set default setting

This function reinitializes the Switcher with default factory settings.

1. All the features are set according to the position of the hardware switches.

#DEF\r