DVI FM1000 Extender EXT-DVI-FM-1000 User Manual www.gefen.com DVI FM1000 Extender EXT-DVI-FM-1000 User Manual www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST Write To: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. DVI FM1000 Extender is a trademark of Gefen Inc. © 2010 Gefen Inc.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Connecting And Operating The DVI FM1000 Extender 6 Specification 7 Warranty CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Connecting And Operating The DVI FM1000 Extender 6 Specification 7 Warranty
INTRODUCTION Congratulations on your purchase of the DVI FM1000 Extender. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI FM1000 EXTENDER • DVI FM1000 Extender can only be operated with multi-mode SC terminated fiber optic cable. • The supplied power adapter must only be used on the receiving unit. Power for the transmitting unit is supplied by the source device.
FEATURES Features • Extends any DVI (Digital Visual Interface)-compliant device up to 3,280 ft (1km) from the computer • Supports video resolutions up to 1080p, 2K, and 1920 x 1200 • Uses inexpensive and widely available single-strand multimode SC fiber optic cable • Automatic EDID Programming feature enables quick and correct sync of source to display • Invulnerability to electromagnetic influences (EMI), thanks to all-fiber construction.
PANEL LAYOUT Sender Front Panel Receiver Front Panel DVI In DVI Out Sender Back Panel Receiver Back Panel Optical 5V DC Cable Input Input Optical Cable Input 5V DC Input 4 PANEL LAYOUT Sender Front Panel Receiver Front Panel DVI In DVI Out Sender Back Panel Receiver Back Panel Optical 5V DC Cable Input Input Optical Cable Input 4 5V DC Input
CONNECTING AND OPERATING THE DVI FM1000 EXTENDER How to Connect the DVI FM1000 Extender EDID Recording: Display information (EDID) contains resolution and timing information for your display. This information is needed by the source for proper video output. Follow these steps to record the EDID of the display into the sending unit. If you know that EDID is not required by the source the followings steps for recording will not be necessary. 1.
SPECIFICATIONS Video Amplifier Bandwidth ....................................................................................... 165 MHz (Single Link) Input Video Signal ................................................................................................................... 1.2 Volts p-p Input DDC Signal .............................................................................................................. 5 Volts p-p (TTL) DVI Connector ....................................................
WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. The two year warranty is only valid on new products purchased as of January 2007.
Rev A1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefen.com fax: 818-772-9120 support@gefen.com Rev A1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefen.com fax: 818-772-9120 support@gefen.