DVI Fiber Optic Extender EXT-DVI-FMP User Manual www.gefen.com www gefen com DVI Fiber Optic Extender EXT-DVI-FMP User Manual www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST Write To: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen, LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender/ Receiver Panel Layout 5 Panel Descriptions 6 Sender Unit Edid Button Location 7 Connecting And Operating The DVI FMP 8 Specifications 9 Warranty CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender/ Receiver Panel Layout 5 Panel Descriptions 6 Sender Unit Edid Button Location 7 Connecting And Operating The DVI FMP 8 Specifications 9 Warranty
INTRODUCTION Congratulations on your purchase of the DVI FMP. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working solutions that are easy to implement and simple to operate.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI FMP • The fiber optics cable must be treated carefully when connectors are exposed. They are susceptible to dust which can contribute to loss of pixels.
FEATURES Features • Extends any DVI (Digital Visual Interface) - compliant device up to 2000 ft (600 m) from the computer • Supports video resolutions up to 1080p, 2K, and 1920 x 1200 • Uses inexpensive and widely available four-strand multimode LC fiber optic cable • Automatic EDID Programming feature enables quick and correct sync of source to display • Invulnerability to electromagnetic influences (EMI), thanks to all-fiber construction.
SENDER/ RECEIVER PANEL LAYOUT Front Panel Back Panel 1 3 2 SENDER/ RECEIVER PANEL LAYOUT Front Panel Back Panel 2 1 3
PANEL DESCRIPTIONS 1 DVI Input/Output The sending unit will connect to the DVI output of the source, and the receiving unit will connect to the DVI input of the display. 2 5V DC Power Supply Input While both the sending and receiving units have the power supply input, only the sending unit should have the included power supply attached. 3 Fiber Optic Cable Inputs Connect the 4 LC terminated fiber optic cables between the sending and receiving units.
SENDER UNIT EDID BUTTON LOCATION EDID Button Hole Insert a small pin into the EDID button hole to program the display’s EDID 6 SENDER UNIT EDID BUTTON LOCATION EDID Button Hole Insert a small pin into the EDID button hole to program the display’s EDID 6
CONNECTING AND OPERATING THE DVI FMP How to Connect the DVI FMP 1. 2. Plug the 5V power supply to the power input of the sender, and connect the power supply to the nearest power outlet. Ensure that the blue LED is ON. How to program the sender with the displays EDID: A. Push the EDID button on the sender unit. The blue LED light will blink twice and then turn off. B. Connect the powered sender to the display while turned on, and not to the PC.
SPECIFICATIONS Video Amplifier Bandwidth ............................................................................................................ 165 MHz Input Video Signal ................................................................................................................... 1.2 Volts p-p Input DDC Signal .............................................................................................................. 5 Volts p-p (TTL) Maximum Single Link Range .................................
WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. The two year warranty is only valid on new products purchased as of January 2007.
*ma-DVI-FMP* Rev X1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 support@gefen.com *ma-DVI-FMP* www.gefen.com Rev X1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefen.com fax: 818-772-9120 support@gefen.
