User manual

5
5
PANEL DESCRIPTIONS
1 DVI Input/Output
The sending unit will connect to the DVI output of the source, and the receiving unit will
connect to the DVI input of the display.
2 5V DC Power Supply Input
While both the sending and receiving units have the power supply input, only the sending
unit should have the included power supply attached.
3 Fiber Optic Cable Inputs
Connect the 4 LC terminated fi ber optic cables between the sending and receiving units.
Ensure that each cable is connected to the same numbered output on both units. These
cables will transmit the red, green, blue. and clock signals used for the DVI extension.
1 DVI Input/Output
The sending unit will connect to the DVI output of the source, and the receiving unit will
connect to the DVI input of the display.
2 5V DC Power Supply Input
While both the sending and receiving units have the power supply input, only the sending
unit should have the included power supply attached.
3 Fiber Optic Cable Inputs
Connect the 4 LC terminated fi ber optic cables between the sending and receiving units.
Ensure that each cable is connected to the same numbered output on both units. These
cables will transmit the red, green, blue. and clock signals used for the DVI extension.
PANEL DESCRIPTIONS