User manual

page | 49
5. Select the desired timeout by using the ◄ or ► keys.
The timeout can be set to one of the following values, in seconds: 0, 5, 10, 15, 20,
25, 30, 40, 50, or 60. To keep the OSD displayed at all times, set the OSD Timeout
value to 0 seconds. The default value is 10 seconds.
6. Once the desired option has been selected, press the Esc key.
7. The following message will be displayed:
8. Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
9. To return to the previous screen, without making changes, press the Esc key.
Yes No
Save Before Exit?
Esc Back
Basic Operation
OSD Menu