User manual

page | 53
4. Select the desired option by using the ◄ or ► keys.
If the Show PC Name is set to Yes, then the name of the PC will be displayed above
the current input resolution. This is the default setting.
If the Show PC Name is set to No, then only the input resolution will be displayed.
See Show Video Signal (page 54) for more information on hiding / displaying
the current input resolution.
5. Once the desired option has been selected, press the Esc key.
6. The following message will be displayed:
7. Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
8. To return to the previous screen, without making changes, press the Esc key.
Basic Operation
OSD Menu
Yes No
Save Before Exit?
Esc Back
03 PC03
1920 x 1200
PC Name